Canon EOS mag

Technique Remote accessories

Remote Control RC-6 If you want a small, versatile, inexpensive remote shooting accessory, look no further than the Canon Remote Control RC-6. Despite its diminutive size (32 x 63.5 x 6.5mm), this device can be used for a number of different tasks.

Using the RC-6 The RC-6 is a very simple device, controlled by just a button and a switch. Make sure the drive mode is set to remote control. Aim the small black arrow in the silver circle at the camera and press the button to fire the shutter. A switch on the back gives the option of immediate firing (‘•’), or firing with a 2-second delay. Line of sight Infrared devices normally need to see each other – often known as ‘line-of-sight’. Based on this, it would seem that you can only use the RC-6 from in front of the camera, and you will find this quoted in some reviews. But it’s not strictly true. If you hold the RC-6 a few inches above the shutter release, aiming down, the shutter will fire when you press the remote button – useful as an alternative to a remote switch. It will even operate from behind the camera if the infrared beam is reflected back from a nearby surface. When aimed from the front of the camera the range is given as 5 metres, though this will vary with the surroundings. Infrared devices can be affected by fluorescent lighting, but we have not experienced any problems. Camera compatibility EOS 5D Mark II, 7D, 60D, 300D, 350D, 400D, 450D, 500D, 550D, 600D Earlier remote controls Also compatible with the above cameras are earlier versions – RC-1 and RC-5. The RC-1 offers the immediate and 2-second delay modes of the RC-6. The RC-5 only has the immediate firing mode.

CLAUDINE RL CO

Problems? We regularly receive complaints about the RC-6 from photographers who say it is faulty. Generally it is not. Here are two things to check:

Bulb mode

Remote Control RC-6

Remote control sensor on camera

Drive mode The camera must be in the Self-timer/ Remote Control mode for the RC-6 to operate. Some cameras have more

Other cameras If you do not have one of the cameras compatible with the RC-6, what choices do you have? Self-portraits For self- portraits you can use the self-timer mode, which is built into most models. When the self-timer is set (in the drive mode), pressing the shutter button starts the 2-second or 10-second timer (2-second delay not available on all models). This gives you time to move to the front of the camera. At the end of the period the shutter fires. The advantage of the RC-6 is that you can fire the shutter when you are ready rather than waiting for the fixed delay to end. Bulb exposures All EOS models have a remote socket, so you can use one of the Remote Switches (page 67) to lock the shutter open during a long exposure. Recording movies As far as we know, the RC-6 is the only device which will start and stop movie recording (currently only compatible with the EOS 60D).

than one self-timer mode – you must use a mode with the symbol of a remote control unit. Pressing the shutter button in this mode gives you a 2 or 10-second self timer delay. Pressing the button on the RC-6 fires the shutter immediately (or with a 2-second delay).

The RC-6 is a wireless transmitter (infrared rather than radio waves). To work, it needs a receiver. Unlike wireless controllers (see page 70), the receiver for the RC-6 is already built into a range of EOS models (see right) . One reason the RC-6 is relatively inexpensive is that you are only buying half the system. You have already paid for the other half – if you have a compatible camera. It is not possible to buy a separate receiver for the RC-6. If you do not have the right camera you will have to look at alternative methods for remote firing. As you can see above, the sensor for the RC-6 is on the front of the camera (EOS 550D shown, but the sensor is in a similar position on other compatible cameras). The RC-6 has a small hole in the bottom left corner for attaching a lanyard (not supplied).

Above The Palace of Fine Art, San Francisco, California. EOS 20D, EF 17-40mm f4L USM lens at 31mm, 30 seconds at f11, ISO 100.

If you shoot in bulb mode, pressing the camera shutter button opens the shutter. It stays open for as long as you hold the button down – not very convenient for exposure times of more than a few seconds. A remote switch (see page 67) is better. You can press and lock the remote button so that you can move away from the camera while the exposure is in progress. But best of all is the RC-6. Press the button on the remote control unit to open the shutter, press it again to close the shutter. If you have the remote control set to 2-second delay, there will be a 2-second delay before the shutter first opens. During the exposure a timer displays the time elapsed on the LCD screen. If you have a camera compatible with the RC-6, using this technique is much easier than attaching a cable to the remote socket.

Auto power The RC-6 will only operate when the camera is switched on. If your camera automatically switches off after 30

seconds without use – one of the settings on the ‘Auto power off’ menu – it does not give much time to move round to the front of the camera and fire. We set ‘Auto power off’ to ‘Off’ when using the RC-6 – the camera stays on until we turn the camera off. It’s a good idea to reset the ‘Auto power off’ to ‘1 minute’ or similar at other times to avoid draining the battery.

Above Elapsed time display during bulb

exposure (shown on the top LCD of some models).

Shooting self-portraits with the Remote Control RC-6 INGRID D’EON

HELEN COULL

Recording movies You can use the RC-6 to start and stop movie recording on the EOS 60D. As with all uses of the RC-6, make sure that the drive

An obvious use for the RC-6 is for shooting self-portraits. Set One-shot mode. When you press to RC-6 button the camera will autofocus and then fire. However, if you do not want to include the RC-6 in the image, set the RC-6 switch to 2-second delay. Now

mode is set to one of the remote shooting

when you fire the RC-6 at the camera you will have a couple of seconds to move the device out of the field-of-view before the picture is taken.

options (there are two options available in the EOS 60D – it doesn’t matter which you choose). Set the switch on the RC-6 to ‘2’. When you press the RC-6 button the recording will start immediately. Pressing the button again will stop the recording. If the switch is set to ‘•’, pressing the RC-6 button will take a still photo. This is a great little feature which we hope will be included in new EOS models.

Left RC-6 used with immediate release. EOS 400D, 1/250 second at f4.5, ISO 400.

Right Family group taken using the RC-6 set to 2-second delay. The RC-6 was activated by Helen (far right). EOS 500D, 1/125 second at f5.6, ISO 100.

36 Reproduced from EOS magazine October-December 2011

Reproduced from EOS magazine October-December 2011 37